View UPD61171_185740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY PRODUCT LETTER
MOS INTEGRATED CIRCUIT
PD61171
SECOND GENERATION ENHANCED MULTIMEDIA ARCHITECTURE PROCESSOR FOR DVD RECORDER/PERSONAL VIDEO RECORDERS
DESCRIPTION
The PD61171 is a fully-integrated system processor for DVD recorders or personal video recorders (PVR). Based on NEC Electronics' second-generation Enhanced Multi Media Architecture (EMMArchitecture), the PD61171 provides the functionality required to realize a high-performance and cost-effective DVD recorder or PVR.
FEATURES
* * * * * * * * * * * * * *
DVD-Video, DVD-Video Recording compliant DVB, MPEG2-TS/PS and MPEG1 compliant codec DolbyTM digital audio codec, DTSTM audio decoder High performance, dual MIPS32TM CPU core: 225 MIPS at 187 MHz High-bandwidth unified memory controller to support external DDR SDRAM Flexible multi-standard, multi-stream processor Integrated CSS and CPPM decryption Integrated CPRM and DES encryption/decryption Integrated Multi-2 and DVB descrambler Dual storage interfaces for ATA UDMA100-compliant HDD and ATAPI DVD drive Real time VBR/CBR encoding 3D noise reduction filter and motion-adaptive de-interlacer 7 graphics planes with dual video scalars Simultaneous progressive and interlace video outputs: 6 DACs for YPbPr (or YCbCr or RGB), S-Video (Y/C) and CVBS output with support for NTSC, PAL and SECAM Multi-channel audio outputs: IEC60958 and PCM with support for up to 8 channels Selectable host bus interface: Generic 16-bit host bus or PCI bus
* *
APPLICATIONS
DVD recorders, personal video recorders, home servers
ORDERING INFORMATION
Part number Package 449-pin plastic BGA (27 x 27) Remark XYZ: Audio option
PD61171F1-XYZ-MN2-A
"Dolby" and "Dolby Digital" are trademarks of Dolby Laboratories. To use the PD61171, a license from Dolby Laboratories Licensing Corporation is necessary.
The information contained in this document is being issued in advance of the production cycle for the product. The parameters for the product may change before final production or NEC Electronics Corporation, at its own discretion, may withdraw the product prior to its production. Not all products and/or types are availabe in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. S16775EJ1V0PL00 (1st edition) Date Published June 2003 NS CP (K) Printed in Japan
2003
PD61171
TYPICAL APPLICATION
Key input Remote Control I/F CS Tuner Unit Ext. Stream Input Analog Tuner Unit
16M SDRAM
Front uCon
78K/0
LCD Module
Stream HDD
GR PD64031A
Ext. Video Input Audio ADC SPDIF Receiver
3D/YC PD64011A
BT.656
Optical Disk
PD61171
PCM
Analog Audio Input Digital Audio Input
Video Output CVBS, S, D
Audio 6ch DAC Audio Output
SPDIF Output i-Link
PHY PD72852A
IEEE1394 PD72893
BT.656 PCM 512 Mbits x 2 64 MB x 2
Memory Card I/F (Option)
16M SDRAM
DDR DDR
Flash Flash
2
Preliminary Product Letter S16775EJ1V0PL
PD61171
FEATURE LIST
High-performance main processor: High-performance MIPS32 CPU core: 225 Dhrystone MIPS @187 MHz frequency 32-bit RISC MIPS architecture Supports MIPS32 instruction set 8 KB instruction cache, 8 KB data cache configuration EJTAG debugging interface High-performance sub CPU: High-performance MIPS32 CPU core with DSP features for media processing 8 KB instruction cache, 8 KB data cache configuration 48 KB scratch-pad memory support Unified memory controller: Supports 32-bit bus width DDR SDRAM Supports data rate up to PC266 Unified CPU / MPEG Codec / Graphics memory Supports 128 M bits, 256 M bits, 512 M bits DDR SDRAM device Total memory size up to 1 G bits External memory interface (EMI): ROM interface Total address area 64 MB/CS for ROM Supports normal, page and flash ROM Supports NOR, NAND and strata flash ROM 2 chip select signals for ROM General input/output (GIO) interface Total address area 16 MB for GIO 4 chip select signals for GIO Supports Intel, Motorola, and 16-bit PC card (PCMCIA) interfaces MPEG video encode engine: MPEG2 video MP@ML, SP@ML standard and MPEG1 standard Single-pass VBR, CBR encode control Supports various picture sizes Horizontal: Vertical: Supports video 8-bit Y/Cb/Cr 4:2:2 (ITU-R BT.656) Time base corrector Embedded 32-bit RISC encode control processor Audio encode engine: MPEG1 audio layer 2 standard LPCM for DVD/D-VHS Supports sample rate conversion Dolby Digital consumer encode (family option) 3
Preliminary Product Letter S16775EJ1V0PL
720, 704, 640, 544, 480, 352, 320 pixels/line 480, 240, 576, 288 lines/frame
Pre-analysis: Film detection, scene change detection and motion estimation assist
PD61171
MPEG stream processor: MPEG2-PS, MPEG2-TS and MPEG1-System demultiplexing Supports DVD-Video, DVD-Video recording and VCD Integrated CSS and CPPM decryption Integrated CPRM and DES for encryption / decryption Integrated Multi-2 and DVB descrambler Multiplex support for format conversion Demultiplex support Partial TS generation Stream interfaces Two 8-bit parallel ports Two serial ports MPEG video decode engine: MPEG2 video MP@ML, SP@ML standard and MPEG1 standard Supports double decode capability for trick play JPEG decode accelerator Audio decode engine: MPEG1 audio layer 1/2 standard LPCM for DVD/D-VHS Dolby Digital 5.1 channel decode (family option) DTS (family option) MP3 (family option) WMA (family option) Supports virtual surround Supports mixing of test tone, attenuation Display/graphics BitBlt engine: 7 graphics planes 256-level alpha blending between all planes Simultaneous interlace and progressive video output Motion adaptive 3D-NR and motion adaptive De-interlacer Clipping functions for OSD Color space and color depth conversion function Two independent real-time scalars plus offline scalers for both OSD planes Sub-picture decoding and scaling functions Video encoder: Six 54 MHz 10-bit DACs for analog YPbPr (or YCbCr or RGB), S-Video (Y/C) and CVBS video output. NTSC, PAL and SECAM standards Support for L21 data, Teletext, WSS, VBID, and VPS
4
Preliminary Product Letter S16775EJ1V0PL
PD61171
External audio/video port: 1 video/stereo audio input port for MPEG2 audio/video encode engine 1 video/stereo audio I/O port for external DV codec device 1 video output port for external video encoder device Multi-channel output port for audio DAC device IEC60958 output port Supported video formats: ITU-R BT.656 ITU-R BT.1358 PCI interface: 3.3 V 33 MHz 32-bit PCI 2.2 Initiator/Target 2 target windows Boot across PCI IDE interface: Supports two IDE interfaces for up to four IDE drives UATA100/66/33, bus master IDE and PIO modes 2 IDE I/F Supports Peripherals: Supports one MultiMediaCardTM/Secure Digital Memory Card interface Supports one Memory StickTM interface Two 16550 UARTs with 16-byte FIFOs Two asynchronous UARTs Supports one clocked serial interface (CSI) Two ISO-7816-compliant SmartCard interfaces Two I2C-compatible multi-master interfaces General purpose I/O Four timers supporting input capture/output compare Two system timers, an elapse timer, a (volatile) real-time clock and a watch-dog timer Physical: Power : 2.5 W (TYP) 2.5 V I/O for DDR SDRAM interface 1.5 V for core logic Package: 449-pin Plastic BGA (27 x 27 mm) Power supply voltage : 3.3 V I/O
5
Preliminary Product Letter S16775EJ1V0PL
PD61171
1. FUNCTIONAL DESCRIPTION 1.1 Overview
The functionality of the device can be divided into the following areas: CPU core MPEG AV encoder MPEG stream processor MPEG video decoder MPEG audio decoder/processor External A/V input/output Graphics processor Video encoder Miscellaneous interfaces
1.2
Block Diagram
Ext. memory DDR266
PD61171
CPU MIPS32 Video Encoder MPEG Video Decode
Display Controller & Scaler
CPU MIPS32
Unified Memory Controller
480P 480I
BT.656
MPEG AV Encode
Stream Processor
BT.656
CSS/CPRM etc. 1st ATA 2nd ATA
TS AV switch
BT.656
Peripheral
Audio Processor
PCM SPDIF
HDD
DVD
6
Preliminary Product Letter S16775EJ1V0PL
PD61171
2. PACKAGE DRAWING
449-PIN PLASTIC BGA (27x27)
D D1 w SB ZE ZD B 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 AE AC AA W U R N L J G E C A AD AB Y V T P M K H F D B INDEX MARK w SA
4-C2.0
A E1 E
25
A y1 S A2 S
y
S
e
A1
M
b
x
S AB
ITEM D D1 E E1 w e A A1 A2 b x y y1 ZD ZE
MILLIMETERS 27.000.20 24.00 27.000.20 24.00 0.30 1.00 2.230.30 0.500.10 1.73 0.600.10 0.15 0.15 0.35 1.50 1.50
P449F1-100-MN2-1
7
Preliminary Product Letter S16775EJ1V0PL
PD61171
Dolby and Dolby Digital are trademarks of Dolby Laboratories Corporation. MIPS32 and MIPS are trademarks of MIPS Technologies Corporation. DTS is a trademark of Digital Theater Systems, Inc. MultiMediaCard is a trademark of Infineon Technologies AG of Germany. Memory Stick is a trademark of Sony corporation. The names of other companies and products are trademarks or registered trademarks of each company.
* The information contained in this document is being issued in advance of the production cycle for the product. The parameters for the product may change before final production or NEC Electronics Corporation, at its own discretion, may withdraw the product prior to its production. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special", and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics products before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M5 02. 11-1

▲Up To Search▲

Price & Availability of UPD61171

	To Download UPD61171 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .